8 Things That You Probably Didnt Know About Kansas City

Kansas City isn’t only about the jazz and blues or barbecues. There are so many things about KC that outsiders probably do not know. Here’s our list of a few of them;

a) The ‘bark’ is more popular here than the barbecue: We love barbecue, but there’s something more drool-worthy. The barbecued meat that’s cut from the edges of a brisket is seasoned and re-smoked to make perfect burnt ends aka ‘the bark’. The chewier the bark, the better is its taste! In fact, we love our burnt ends so much that there’s a BBQ joint dedicated to them in Overland Park.

b) Berlin is in Kansas City: Well, not if you think of it as a German city! But Berlin and Nikita are the names of two polar bears at the Kansas City Zoo. This zoo covers more than 200 acres of land and hosts more than a 1000 animals.

c) Happy hours were illegal until 2012- Alcohol laws in Kansas City are some of the strictest in the United States. In fact, until the alcohol prohibition law was changed, bars were not allowed to offer drink specials to certain demographic groups like women, retirees, or members of fraternities. It is common for Kansas residents to work in the city and go to Missouri for a drink.

d) Air raid sirens are still in use here: The cold war is long over, but air raid sirens continue to blare to warn about twisters. Unless they’re new to the city, people are not bothered by the sound and they continue with business as usual.

e) This is the best place for a pizza: Kansas City pizzas were chosen as the best in America by the Travel and Leisure magazine. Pizzabella, Minsky’s and Kelso’s are some of the local favorites.

f) Kansas City is THE soccer capital in the country: Soccer is an important part of the local sports scene thanks to local teams like the Sporting Kansas City. We also have some of the best facilities in the country for soccer.

g) This is the City of Fountains: KC has more fountains than anywhere else in the US. We also celebrate Fountain Day every April when all the fountains in the city are turned on.

h) Kansas City, North and North Kansas City are two different places: North Kansas City or Northtown is a small city on the north of the Heart of America Bridge, while Kansas City, North or Northland refers to any part of KC that’s to the north of the Missouri river.

Advancements in Biopharmaceutical Research in Tanah Merah City

In recent years, Tanah Merah City has emerged as a hub of groundbreaking advancements in biopharmaceutical research, marking a significant milestone in the region’s scientific landscape. This vibrant city has become a focal point for innovative research and development in the field, attracting top-tier scientists, cutting-edge laboratories, and substantial investments from both public and private sectors.

 

One of the pivotal areas of progress in Tanah Merah City’s biopharmaceutical research is the development of novel therapies for challenging diseases. Researchers here have been at the forefront of creating new biopharmaceuticals, including monoclonal antibodies and gene therapies, designed to target specific molecular pathways involved in diseases like cancer, autoimmune disorders, and rare genetic conditions. These therapies offer promising prospects for patients who previously had limited treatment options.

 

Moreover, Tanah Merah City has seen significant advancements in vaccine development and production. The city’s research institutions and biotech companies have collaborated closely to accelerate the timeline from vaccine discovery to clinical trials and regulatory approval. This collaborative effort has been particularly evident during global health crises, where rapid vaccine development has been crucial in combating infectious diseases effectively.

 

In addition to therapeutic and vaccine innovations, Tanah Merah City has made substantial strides in biopharmaceutical manufacturing technologies. State-of-the-art facilities equipped with advanced bioprocessing capabilities enable efficient production of biologics at scale. This infrastructure not only supports local research initiatives but also positions Tanah Merah City as a competitive player in the global biopharmaceutical market.

 

Furthermore, the city’s commitment to fostering a conducive ecosystem for biopharmaceutical research and development is underscored by its investment in cutting-edge research facilities and supportive regulatory frameworks. Government initiatives aimed at attracting and retaining talent in biotechnology have further bolstered Tanah Merah City’s reputation as a premier destination for biopharmaceutical innovation.

 

Collaboration between academia, industry, and healthcare providers has been a cornerstone of Tanah Merah City’s success in biopharmaceutical research. Research partnerships and knowledge-sharing initiatives have facilitated interdisciplinary approaches to tackling complex scientific challenges. This collaborative spirit not only accelerates the pace of discovery but also enhances the translation of research findings into clinical applications that benefit patients worldwide.

 

Looking ahead, Tanah Merah City remains poised to continue its trajectory of biopharmaceutical innovation. Ongoing investments in research infrastructure, talent development, and strategic collaborations are expected to drive further advancements in therapeutic modalities, vaccine technologies, and biomanufacturing processes. These efforts not only contribute to the city’s economic growth but also uphold its commitment to advancing healthcare solutions on a global scale.

 

In conclusion, pafikotatanahmerah stands as a beacon of progress in biopharmaceutical research, characterized by its pioneering discoveries, robust infrastructure, and collaborative ethos. As the city continues to push the boundaries of scientific innovation, its contributions to the field promise to shape the future of healthcare, offering hope and healing to patients worldwide.

LED Lighting Terms Everyone Should Know

Basic lighting terminology
Light emitting diode (LED)
LED (short for Light Emitting Diode) is a two-LED semiconductor light source that emits light when an electric current is passed through it. During this process, energy is released in the form of photons. Without getting too technical, what you really need to know is that LEDs are more efficient at converting energy into light compared to incandescent and fluorescent models. Consuming less energy, LEDs last much longer and don’t generate as much heat as traditional picture lights, for example.

Built-in LEDs allow you to get a thin profile with a thickness of 1/2′′. Today, more and more lighting fixtures use built-in LEDs. These are LEDs built into the luminaire on a permanent basis, as opposed to devices with removable LED lamps. The advantage of built-in LEDs is that they allow lighting manufacturers to create sleeker and thinner fixtures. With a thickness of less than 1.5 cm, these innovative LED models can be installed in places where no other recessed luminaire can. For example, a lot of LED users like to install them to highlight art, and all modern picture lighting is based on a LED lighting.

So how long do LEDs last? A very long time! Most LED bulbs typically last between 25,000 and 50,000 hours. For comparison, a typical incandescent lamp lasts about 1,000 hours, up to a maximum of 2,000 hours. LED lighting does not burn out like traditional light sources; instead, it slowly fades over time. Often, when buying an LED fixture, you will see the inscription “50,000 hours to 70 percent” (“L70″). This means you can expect LED lighting to last at least 50,000 hours, by which time it will be at least 70 percent of its original power (down 30 percent). The long lamp life combined with the low power used to create the light is what makes this technology so promising.

One of the best things about LED technology is that it allows you to create your own custom lighting design using different color temperatures, brightness, warmth and efficiencies.

Correlated Color Temperature (CCT)
Most LED fixtures offer a choice of color temperatures in various shades of white. This temperature, or CCT, is measured in degrees Kelvin (K) on a scale of 1,000 to 10,000. The higher the Kelvin, the closer the luminaire’s color rendering is to real sunlight. Warmer whites typically have a temperature of 3000K or lower, while neutral whites typically have a temperature of 4000K. Temperatures of 5000K and above on the Kelvin scale result in “cool” white light. Typically, the Kelvin temperature for commercial and residential lighting fixtures is somewhere between 2500K and 5000K. It is important to consider color temperature when choosing a light fixture so that the look and feel of the light matches the mood and atmosphere you are trying to create.

Color rendering index (CRI)
The CRI scale gained popularity as LEDs became more widely used in homes. CRI goes hand in hand with color temperature in choosing the right lighting for your application. Basically, CRI is an assessment of how well a light source renders the colors of objects in their natural form. Think of it this way: in today’s social media world, we’re used to seeing things shown through various filters and apps that change how an object or item looks in real life. The goal of CRI is to remove the filters and accurately display colors as they are, from a piece of art hanging on the wall to food being prepared in the kitchen. On a CRI scale of 1 to 100, LED light sources with a CRI of 90+ are considered the best in terms of color rendering. The higher the CRI, the more accurate colors will appear under LED lighting.

Power and luminous flux (watts and lumens)
When shopping for LED lighting, you often see lumens and watts being used together. For example, Lm/W = lumens per watt. Many people think of watts as a measure of light output. In fact, it is the number of lumens that is used to measure the “perceived power” of light. The more lumens, the brighter the light appears. A watt is a unit of electrical power that measures the amount of energy you use, which is what you pay for on your utility bills.

“Lumens per watt” is an important consideration when buying LED lighting. For example, a certain LED lamp can consume as little as 9 watts while providing 1000 lumens. At the same time, an equivalent incandescent lamp consumes 100 watts to produce the same number of lumens.

Dimming
Lighting control is becoming more and more popular, as is consumer demand for a smart home. Being able to adjust the level of light in a room is very important, so we recommend using dimmers wherever possible. Good LED lighting manufacturers use dimmable LEDs, but it’s important to always check this when buying and don’t assume that every fixture is dimmable. Dimming is another way to save energy and reduce operating costs.

Other useful terms
Line voltage and low voltage
Line voltage is the standard voltage used in sockets and junction boxes – 220 V in the post-Soviet space, 110-120 V – in the USA, Canada and a number of European countries. Therefore, line voltage luminaires, in fact, support the principle of “plug-and-play” – “plug and play”.

Low voltage lighting typically uses 12V or 24V and requires a transformer to step down the mains voltage to avoid the low voltage bulb from burning out. The transformer for low-voltage lighting is either built into the light fixture (driver for the lamp) or located separately (power supply for LED strips).

Rating L70/LM80
As mentioned above, L70 is simply a measure of the time it takes a light source to degrade to 70 percent of its original output. LM80 is an approved test method that is used to measure the lumen depreciation of LED light sources.

“Listed as DLC”

In many countries, energy companies offer discounts when a commercial building changes its lighting to LED. DLC is a list of approved LED luminaires used by energy companies to provide these discounts. Your luminaire must be included in this list to receive the discount for switching to LEDs.

IC Rated
IC stands for “insulating contact”. An IC-rated recessed luminaire can be used in an insulated ceiling (e.g. stretch or plasterboard suspended) without the risk of overheating.

As more businesses and homes are switching to LED lighting, it’s important to know what these terms mean when shopping for fixtures. Of course, our team is always ready to help clients if they have questions or need additional information.